Basic Features
Supports:
1. SAE J1850 PWM (41.6 Kbaud)
2. SAE J1850 VPW (10.4 Kbaud)
3. ISO 9141-2 (5 baud init, 10.4 Kbaud)
4. ISO 14230-4 KWP (5 baud init, 10.4 Kbaud)
5. ISO 14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO 15765-4 CAN (11 bit ID, 500 Kbaud)
7. ISO 15765-4 CAN (29 bit ID, 500 Kbaud)
8. ISO 15765-4 CAN (11 bit ID, 250 Kbaud)
9. ISO 15765-4 CAN (29 bit ID, 250 Kbaud)
Automatically determines and identifies to the user the vehicle communication protocol under test Supports generic SAE J1979 (Mode $01) parameter identifiers (PIDs) $00 through $4E.
Displays all or custom list of diagnostic data parameters supported by the vehicle's OBD II controller with line graphs and meters.
View the condition of the vehicle system at the time when an emission related diagnostic trouble code was stored with Freeze Frame mode.
Read emission DTCs (and their common SAE descriptions) that cause the MIL to be illuminated. Plus, display the DTC number for the non-SAE defined DTC numbers and descriptions that are reported by OBD II emission ECUs.
Supports over 4200 generic diagnostic trouble codes descriptions from SAE J2012 and over 3600 enhanced OBD-II codes, or a codes defined by the Original Equipment Manufacturer (OEM).
Clear all emissions-related diagnostic information. (Mode $04)
Review the results of the oxygen sensor testing performed by the vehicle's power train control module with “Oxygen Sensors” mode (Mode $05).
Displays non-continuous diagnostic test results specific to the vehicle manufacturer (Mode $06 data) with the “Monitoring Tests Results” mode.
Reports vehicle's continuously monitored emissions-related tests that have failed during a drive cycle and have not matured to indicate a diagnostic trouble code with “Pending Diagnostic trouble Codes” mode.
Displays specific information applicable to the vehicle under test (VIN, Calibration ID, Calibration Verification Number, In-Use Performance Tracking).
Metric and English units of measure.
